MIMO - Multiple - Input / Multiple - Output Antennas

MIMO refers to a practical technique for sending and receiving more than one data signal simultaneously over the same radio channel by exploiting multipath propagation. The principle of diversity is to provide the receiver with multiple versions of the same signal. Diversity helps to stabilize a link and improves performance reducing error rate. Space diversity uses antennas located in different positions to take advantage of the different radio paths. MiMo antennas are good in strong networks where we have multiple basestations and lot of reflected signals around us.


NEW!! proANT5331A4 5G high performance MiMo antenna

4 x MIMO WITH CROSS POLARIZATION DIVERSITY

FREQUENCY RANGE EVEN 790MHz-6000MHz

COMPATIBLE WITH MOST 2G, 3G, 4G AND 5G FREQUENCY BANDS

proANT5331A4 is the newest member to the proANT5331 series. This unique 5G MIMO antenna with non symmetrical antenna arrangement is perfect solution for 5G routers. It has one high performance radiating element which is used in leading edge proTAC antenna family which seamlessly covers frequency bands from 790MHz up to 6GHz. Other radiating elements enable MIMO operation in the frequency range of 824-2170MHz and beyond. It has very robust and compact design and gain up to 5dBi. Available with blue or white radome.

proANT5331 high performance 4G/5G MiMo antenna series

proANT5331_1.jpg

proANT5331 is high performance MIMO antenna family that can include up to 5 antennas. The primary 4G/5G antenna is based on our leading antenna design, proTAC5311 and covers all 4G/5G frequencies between 790MHZ-6GHz. Auxilliary 4G/5G antenna enable MIMO operation in the frequency range of 824-2170MHz and beyond. It is possible to add 2 4G/5G antennas OR 2 dual band WiFi antennas and GNSS antenna. Check the available variations here -> ORDER CODES

  • 2 x MiMo for 4G/5G Diversity (main, aux)

  • Active GNSS antenna

  • 2 x MiMo for 2.4GHz/5.8GHz WiFi

    OR

  • 2 x MiMo for 4G/5G 824-2170MHz aux

Antenna gain 0-5dBi. BSP1”-11TPI (1 1/4”-11TPI) internal thread antenna mount.

proANT5331 main VSWR.jpg
mounting option a: bsp1”-11TPI (1 1/4”-11TPI) inner thread with rg316 cables and sma-female connectors (other connector types by request, in picture sma male)

ANT5331A: bsp1”-11TPI (1 1/4”-11TPI) inner thread with rg316 cables and sma-female connectors (PLEASE NOTE PICTURE IS NOT CORRECT WITH sma male CONNECTORS)

MOUnting option B: BSP1”-11TPI (1 1/4”-11TPI) inner thread with n-female connectors

ANT5331B1: BSP1”-11TPI (1 1/4”-11TPI) inner thread with n-female connectors

ANT5331B1W

proANT5340 - low cost MiMo antenna

ANT5340 antenna

proANT5340 antenna is inteded as a cost effective, all-in-one solution as outdoor antenna for one 4G router. It consists of 2 LTE elements, 2 dual band WiFi elements and an active GPS antenna. All connectors are SMA plugs with male pins.

  • 2 x MiMo for LTE/4G, cross-polarized

  • 2 x MiMo for 2.4GHz / 5GHz WiFi

  • Active GNSS antenna 1559-1610MHz

Antenna gain 1-5dBi. BSP1”-11TPI (1 1/4”-11TPI) internal thread antenna mount.

frequency polarization.jpg
VSWR of the lte elements. lte1 (in black, vertical), lte2 (in blue, horizontal)

VSWR of the lte elements. lte1 (in black, vertical), lte2 (in blue, horizontal)

 
Connection example.jpg