Intelligent Gateway technology enables interfacing with NMEA 2000 and a PC, and converting between NMEA 0183 and NMEA 2000.

The NGX-1 is an intelligent multi-function gateway, combining the power of our two previous generation products (NGT-1 and NGW-1) into one, cost effective, flexible product.

The NGX-1 provides an uncomplicated way to link between a boat’s data networks and converts NMEA 0183 data into NMEA 2000 data and vice-versa. Multiple NGX-1 units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network, using the network as a means of combining and transferring all data from one place to another.

The NGX-1 is also an NMEA 2000 to PC interface, able to precisely transfer messages to and from the NMEA 2000 bus. It is compatible with a wide range of chart-plotters, display and configuration applications available for PCs.

Actisense Toolkit and NMEA Reader software packages enable viewing of NMEA 2000 PGNs, device set-up, configuration and diagnostics all to be performed via the NGX-1.

FEATURES

• Vital NMEA 2000 diagnostic tool

• USB version is fully isolated to prevent dangerous ground loops

• ISO version has OPTO-isolated input and ISO-Drive™ output for safely interfacing with RS232 or RS422

• Up to 230,400 baud data transfer rate

• Advanced configuration using Actisense Toolkit allows Tx / Rx lists and Tx rates to be set

• Supports Fast Heading at 10Hz

• Integrated 1.5m drop cable

• Multiple diagnostic LEDs

BENEFITS

• Allows all major PC Chartplotter applications to interface with the NMEA 2000 bus

• Provides a rule-enforcing firewall between the PC and the NMEA 2000 bus

• Powerful diagnosis of the NMEA 2000 network using the FREE NMEA Reader software provided

• Configure and flash-update Actisense products on the bus

• Upgrade NMEA 0183 equipment to NMEA 2000

• Allow NMEA 0183 devices to receive vital NMEA 2000 data

• Use the NMEA 2000 bus to multiplex several NMEA 0183 signals together

• Reliable, renowned bi-directional conversion engine

• Supports a wide range of conversions including AIS

• Easily configurable using Actisense Toolkit

The NGX-1 is available in two versions:

NGX-1-USB: equipped with a USB cable to allow Plug and Play connectivity with a PC

NGX-1-ISO: equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.

DATASHEET

WGX-1 Gateway can act as an NMEA 2000 to PC Interface, or as a bi-directional NMEA 0183/2000 Converter with WiFi capability.

The WGX-1 is an intelligent gateway that can route and convert data bi-directionally between its NMEA 2000 and ISO (hard wired serial) ports as well as stream this data over Wi-Fi.

NMEA 2000 data can be converted to a number of useful formats. Converting NMEA 0183 data to NMEA 2000 (and vice versa), allows sharing of information between devices from the two standards.

The Actisense WGX-1 also makes it possible to send and receive NMEA 2000 data safely between a PC and an NMEA 2000 network.

Acting as an NMEA 2000 to PC Gateway allows the device to act as a rule enforcing firewall between the PC and the network, giving the user full control over what data is passed and blocked. The WGX is capable of transferring every currently available NMEA 2000 PGN from the network to a PC application. Advanced filtering allows precise control of data.

The WGX-1 wireless connectivity enables data transfer from the WGX to any device (e.g. laptop, tablet or smartphone) connected to it via Wi-Fi.

The ISO port provides OPTO Isolation on the input and ground breaking ISO-DriveTM technology on the output to keep your devices safe from hazardous ground loops.

Thanks to the device being low power, it is powered directly from the NMEA 2000 network, removing the requirement for an independent power supply.

The WGX-1 has the legendary Actisense “Reliability Built In” along with useful diagnostic LEDs, internal antenna, enhanced password security, full certification and all packaged in an extremely rugged IP67 case.

FEATURES

• OPTO-isolated input and ISO-Drive output for safely interfacing with NMEA 0183 or RS232 / RS422.

• Up to 230,400 baud rate data transfer rate.

• Integrated 0.75m ISO cable.

• Advanced configuration using Actisense Toolkit allows Tx / Rx lists and Tx rates to be set.

• Supports fast-heading at 10Hz.

• Actisense-i network health checker provides valuable feedback on status of NMEA 2000 network.

• Supports both TCP and UDP data streaming over Wi-Fi.

• Wide range of support for various mobile apps.

• Remote Firmware upgradability ensures the device is future proof.

• IP67 rugged case.

• Vital NMEA 2000 diagnostic tool.

• Diagnostic LED’s on both input and output.

DATASHEET